Waiting at the airport

It's hard to imagine that air travel was ever glamorous.

Where Did You Wake Up?

Slept under the stars last night. Somewhere in Utah.

Across The Continental Divide

Took US30 north from Laramie until it met up with I-80. Went over the continental divide and the brakes are holding on the downside.
The Guy on the chopper is my hero for the day. I know that he's gone at least. 150 miles today. He was flying when he passed me.

Back on the road again

After lunch at the best diner in Laramie

Thoughts From The University of Wyoming

In college I learned how to study things but I didn't learn how to learn anything.

Youth is not wasted on the young, cynicism is wasted on the old.
.

Look Ma, No Brakes!

Laramie Wyoming GM dealer is working to get me back on the road. The last few miles coming down the grade into Laramie were "interesting"!!!

Turning 2000

Amazing day. I got past the flooding in Ames IA by going north to a 2-lane country road. Had to sleep in the truck. The beauty of the farm land was so great that I stayed on it to the end. Then I took US30 instead of going back to I-80. It may have cost me a couple of hours extra driving but it was worth it.
The road runs next to the Union Pacific main line so I go a 75 car freight train every 15 minutes.
Lots of rain and thunder storms all around me but I threaded the needle between them and stayed dry.

Turning 2000

Just went past Cheyenne WY. It's been a great day. Took US30 from Ames IA. Was tired of droning along I-80 and decided to see what I was missing. Too much to tap into the Droid but I'll write it all later. Over the Rockies tomorrow

Iowa

The possibly exists that I have taken a wrong turn. Or I just might be having way too much fun!

Turning 1000

1 monster thunder storm, 95F & 95% humidity, and dozens of construction projects. Thank God for a/c! Spent the night with a buddy in Cleveland. Always good to see old friends. Getting near Rock Island as the Speedo spins past the first 1000.

LSR News - 0 Hour

It appears that it takes a ton of stuff to get a 150 pound bike to Bonneville. I'm finally loaded and ready to hit the road. Only 2 hours late which is good for me.

Somewhere in here there is room for me. I guess a van would have been a good idea. I'm hoping it will settle over time.

Next post from the road.
.

LSR - 12 Hours To Go

Compare this with this morning's picture!

However, there was blood, sweat, and tears along the way. Not to mention a trip to Home Depot, and Cables & Connectors for some last minute items.

First the steering dampener didn't clear the fairing. So a little creative sculpting was called for.

Then I had wired in the tether kill switch wrong and the engine wouldn't start. Another hour lost making the wiring changes. My fault for not testing the switch before I installed it.

Finally, it went down the road like the proper racer it's supposed to be and there were smiles all around. Now it's time to load up the truck and get a good night's sleep.

Tomorrow I hit the road and will post my adventures from along the road.

LSR News - 24 Hours To Go

I'll be on the road at 8am tomorrow morning. However this is what the bike looks like at the moment.

Notice the fine chain guard held together by high-speed clamps.

However, the kill switches are wired in with Radio Shack parts.

Another fast trip to the Home Depot and it will be running by this afternoon! I'll post more pictures then.

People I Hate

OK, things are a little stressed as the deadline for Bonneville approaches. As it says on your mirror, "Objects may be closer than they appear." No shit Sherlock! Tuesday at 8am I'm hitting the road but today I'm still trying to wire up the new kill switch.

So I'm waiting in line at the donut shop this morning and I'm seriously considering the penalties for homicide. The people in front of me wait 5 minutes for their turn and when the clerk asks them what they want they say, "Oh l don't know. Let me see ..." I'm thinking that if I could take a video of them no jury in the world would convict me.

Which got me to thinking  about some of the other people I hate:

• The old lady at the post office who can't decide whether she wants the cat stamps or the bird stamps. Lady, nobody cares. They rip open the envelope and throw it away!
• The woman at the store who digs around endlessly in the bottom of her purse for 17¢ in change. "No, no, I've got it here somewhere."
• The mommy who finally gets to the counter at the ice cream shop and then asks little Suzie what flavor she wants. She has to recite them all because Suzie is too cute to be able to read at age 6.
• The bozo who stands at the counter at McDonalds trying to figure out what to have while we all wait. Hey, genius, it's the same as last week, last month, and last year. You should have it memorized by now. Or are you new to this planet?
• The woman who wants to write a check at Target. Does she have it out and ready to write? Of course not, she waits until the associate tells her the total and only then explores the dark depths of her bag to find her check book. Does she get her driver's license out while she's down there. No again, this takes another trip into the doom and gloom chamber. Like she didn't know they were going to ask for it?
• The old man who wants to drive 5 mph below the speed limit. I'm not as young as I once was either but when you notice 20 cars strung out behind you wouldn't it be courteous to pull over?
• The morons on bicycles who want to ride 2 or 3 abreast while they chat and everyone else piles up behind them. I dream of having a paintball gun at times like that.

And the list goes on and on. Leave a comment below with your favorites

Covered Bridge Tour

I've been busy with the LSR bike and work in Boston. Jack Cole sent this info on his upcoming tour for bikes in upstate New York. I'll be in Utah getting ready to Rock & Roll but anyone else should try and make it. If you don't have an old bike Jack will not turn you away. But be prepared to get the urge to get one after an event like this. It's infectious!

Basically, bikes 30 years old or older, no size limit.  Ride starts around 9:30 or 10 am Sat Aug 14, rain or shine, at my place, 41 Gardiner Place, Walton NY.

Ride is 130-150 miles, I am doing it again today to shorten and liven it up a bit. Lunch stop about 1/2 way.

Indoor Camping available for Fri. night in the church parish hall or pitch a tent on my lawn.  We can do anther ride Sunday after church if folks want to, going north.

No charge, but feel free to throw some money in the pot for the Sat night BBQ and gas for the chase truck.

Jack

Trip Planning to Bonneville

Mapping out the route to Bonneville is pretty simple. Get on I-80 and keep going! My mapping software put it in plain terms, "At IA/NE border go straight for 929.86 miles." Then there was a slight change before continuing for another few hundred miles.

The route back will be a bit more relaxed. I'm going to be heading south through some of the most beautiful areas in the U.S. If you haven't seen it, check out the slide show of my cross-country trip to see the wonders of the Moab area. From there I'll be touring through the Colorado Rockies and especially Independence Pass. With all due respect to the Stelvio Pass in the Alps this has got it beat hands down. Especially if you're on a motorcycle and like a bit of spirited riding. Breathtaking views combined with a road that has heart stopping climbing and descending turns. Bring a strong engine and stronger brakes (and clean underwear just in case)!

After visiting a friend in Colorado Springs it will be a slab dash to get home. I'll be posting pictures from along the route there and back. Stay tuned!

Steering dampener

The steering dampener bracket came in today so it is mounted. One more item checked off

Aprilia One Ups BMW

If you have a long memory you might remember my post of BMW yanking a tablecloth from under a banquet table.

The there was the spoof of a Vespa doing the same thing.




Now Aprilia has made another jab at BMW with this video. Since they are #1 in WSBK racing results and BMW is next to last it's a pretty fair shot.

Here are some other videos of Aprilia making fun of BMW ads.

Lastly, how about a free Aprilia t-shirt!? (for only $8.99 shipping and handling)
.

Something to be torqued about

"If I had four hours to chop down a tree,
I would spend three hours sharpening my axe."
- Abraham Lincoln

Too many of us jump into a job without thinking about the basics. I just took apart an engine that was apparently assembled by King Kong. The aluminum drain plug gasket was mashed down to a mushroom shape from being over torqued. The valve covers took a 6 point socket and an 18" breaker bar to loosen. Even the valve adjustment nuts were miserable. What was this person thinking?

One of the first things they discussed in Honda School was the correct tightness of fasteners. They had a variety of nuts and bolts on a test board and we were asked to tighten them down as we thought best. Then they took a dial torque wrench and showed us how far off we were. In every case, myself included, they had all been over-tightened.

Obviously this leads to stripped threads but, more subtly, it leads to parts failure because of excess stress. At the school, the next hour was spent tightening all sorts of things with a torque wrench to get the proper feel for each of the bolt sizes. Nobody gets out a torque wrench to tighten side cover bolts but a few minutes with a torque wrench can be very revealing. I do it about once a year as a reminder of what I already "know". Funny how what I "know" seems to drift with time.

For the record the standard values for each size is listed below. Just as a reminder, the listed size refers to the thread size, not the wrench size. A 6mm bolt generally takes a 10mm wrench to tighten it, 8mm bolt is 12mm or 14mm wrench size, and 10mm is 14mm or 17mm.

Standard torque values from the Honda manual:

(most 3/8" torque wrenches are unreliable under 20 ft/lbs. A 1/4" drive torque wrench is necessary for accurate work)

• 5mm - 3.6 ft/lb - 43 in/lb
• 6mm - 7 ft/lb - 84 in/lb
• 8mm - 16 ft/lb - 192 in/lb
• 10mm - 25 ft/lb - 300 in/lb
• 12mm - 40 ft/lb - 480 in/lb
  -
• 6mm flange head - 9 ft/lb - 108 in/lb
• 8mm flange head - 20 ft/lb - 240 in/lb
• 10mm flange head - 29 ft/lb - 348 in/lb
  
  A handy torque conversion calculator can be found here.

If you are tempted to tighten something more to be sure it doesn't loosen consider that if you cause the bolt to stretch it will loosen even faster! Possibly even failing completely!

If you are worried about something vibrating loose use Loctite, don't overtighten.

.

Progress

As I take off more & more I'm not sure if the progress is forward or backwards