Aprilia Tuareg - New Dual Sport Bike

Could this be the bike that pries me away from my beloved Transalp?

The Aprilia Tuareg is rumored to be a 750cc V-twin with real "enduro" suspension, a 21-inch front wheel, and weight around 445 pounds.

Since KTM refuses to bring the Euro only 690 Adventure to the US this Aprilia is certainly enticing. Their 450 and 550 v-twin dirt bikes have been well received and provide plenty of power. So much so that the 450 was banned from MX competition in the US. At the most recent Dakar Rally an Aprilia 450 came in 3^rd overall after 2 KTM's and ahead of the Yamaha and Sherco (Honda) teams. Not too shabby for such a small manufacturer.

The rumor is that this model will be released in the fall as a 2011 model. When, if ever, it reaches the US is the big question. How much it will cost is another. However, Aprilia has done well by supplying unique and interesting low volume bikes at competitive prices. The only thing lacking is a robust US dealer network.

.

The History of Bike Bondage

In the beginning there was rope. And the rope was an evil slippery thing that would loosen and break where it would do the most harm. Many were the motorcycles that crashed in the backs of pickups and fell off of trailers because of the evil ways of the rope.

And then there was the strap. And in all the lands of the strap the Ancra was the best and the strongest and the most trustworthy. Many were the pretenders and lesser straps. Some seemed to be cousins of the rope and were most happy to part at inopportune moments and lead to destruction. Even amongst the Ancra there was scratching and breaking of plastic panels. The world was not yet perfect.

The soft strap arrived to join the Ancra to the motorcycle in harmony. A supple shape that many put on backwards, it kept the plastic whole and unharmed. And it came in many bright colors so to be easy to be found in the dark. Because it was separate and prone to wander off into the wilderness it always seemed to be singular when a pair was needed. It was rumored that the soft strap was a cousin of the sock which also was prone to be lost on the dark side of the moon.

And then came Malcolm into the land of the strap and he joined the strap and the soft strap into one. It had the strength of the Ancra and the suppleness of the soft strap. It was attached and was never lost. All who saw it rejoiced and praised Malcolm and added the MSR strap of many colors to their tool boxes.

To protect the plastic even more there came the Canyon Dancer to the world and it was good. And then came the Canyon Dancer II which was even better because it understood that the plastic must be protected from all things evil and scratchy. It kept the pressure from the strap from cracking the plastic and held the motorcycle firm in it's place.

But still the land was not perfect. For in loading the motorcycle to the truck or trailer only a true magician could keep the bottom hook from falling off while attaching the top strap. It was the dance of the jester trying to get both linked up at once. Then, behold, a new strap appeared with the wisdom of the mountaineer. It replaced the bottom hook of the strap with a swivel carabineer that would not fall off and would not twist and tangle.  Lo, said the people who saw it. This is the most perfect strap yet. It is strong like the Ancra. It has the soft strap like the MSR. And it does not require a magician to attach. What could be more perfect than this? Well, a little better price perhaps but that will come in time.

iPad Mania In Perspective

After all the hype I'm glad somebody has a sense of humor! Here's the iPhone 3G put to the test.

The Day After The Day After The Crash

Well, the good news is that my hard drive is alive and functioning. The bad news is that the computer is shot! The disk controller is built into the mother board and when it goes the whole mother board has to be replaced. I'm tempted to replace the whole thing and install the current drive as the second drive on a new laptop. I've hated the keyboard since the day I bought the computer and this may be my chance to get a new one. I'm waiting for a price on a new motherboard today.


While I have been doing backups regularly, they were not nearly as complete as I thought. The big files like my Quicken data were saved properly but a lot of little detail data was not. All the login data for each bank was gone as I had it in a separate file that was not saved.


What I learned:

1. Organize your personal data into groups, put them in separate folders and add them to the backup list. Encrypt sensitive data like bank account numbers and passwords with a program such as TrueCrypt. Keep it current!
2. Backup all the browser bookmarks. I have a lot of obscure links to race parts suppliers and travel places that I wouldn't die for not knowing but would not be happy about losing.
3. When you install a new program and get an activation key copy it to a file and make sure it's in a folder that's backed up. Just cut & paste it into a file. Do you really want to spend hours on the phone with Microsoft trying to get a new key for Word?
4. Backup all your email addresses. If you use an online program like gmail it's done for you. If you use Outlook on your computer you're on your own and need to back it up.
5. Keep all your correspondence, resumes, etc. in a separate folder (NOT a sub-folder of the word processing program and NOT in the MyDocuments folder). The reason is to make it easier to backup and restore.
6. Do a backup EVERY day. Schedule a time and make it a habit. Nothing is more frustrating than trying to help a friend and finding they haven't backed up for 2-3 months.
   
7. Use an external drive for backups. It will not help you at all if your backup files are on the same drive that just crashed. They are cheap and most include software that will automatically do the backups for you.
8. Check that the backups are all getting done as you think they are. Try to restore a test file and make sure you know how to do it and that what you get back is what you think you saved.

#8 may be the most crucial. I thought I was saving more than I really was. Many files that I had taken for granted turned out to be very important. Trying to find my on-line login id for some accounts turned out to be a real pain. Since FireFox remembered all these for me I never bothered to write them down anywhere. Big Oops! 

As they say, "It's not if you crash, it's just when!" Think of all this as helmet and leathers for your computer. I thought I was careful and protected, and I was to a certain extent. Next time I'll be even better prepared.

The Day After The Crash

Digital, not vehicle.

I'm working on my old laptop and the backups I made. My hard drive crashed and it's in the shop. I'm hoping to get word tomorrow but I'm sure that all my work is gone and I'll be relying on backups for my information. The good news is that I have backups. The bad news is that they are not as complete as I thought. More on this later when I get more news.

In the mean time here is how the Germans park their cars in Munich.

What Can a BMW S1000RR Do That A Vespa Can't?

Apparently Nothing! Scooter Trash Rules!!

Click Here for the original version.
.

This is your brain on a cel phone

Think your cel phone is safe? Watch this video!

That's all for today, I'm off to do battle with the DMV. Getting a title for the CB650 should be an adventure.

Oh, and one follow up to the Spring Brake series. You are lubing and checking your chain adjustment everyday. Right!? OK, you BMW riders may laugh now but wait 'till you need your splines lubed and rear end oil changed. Who's laughing then!?

Spring Brake - Part 3

To wrap up this series on Spring maintenance I'll look at springs today. And shocks.

When I was in college and sometimes dabbled in alternate realities the one thing that always amazed me was that "Gravity never misses." Throw a ball in the air a hundred times and it will come down a hundred times. Sure, if I could have thrown it hard enough it would have escaped earth's gravity well but it was all I could do at such times to just make it to the kitchen to satisfy my munchies.

The point is that from the moment your bike was built gravity has been at work to make it sag like an old lady's tits. The forks suffer the most because most of them have no pre-load adjustment. Whether you are 5'3" and 100 pounds or 6'4" and 240 pounds you get the same springs. The lightweight rider will get a harsh ride because they don't have enough weight to cause the springs to flex. The heavyweight rider will suffer a mushy ride for the opposite reason. Using lighter or heavier fork oil will compensate but only slightly.

For most bikes you can buy after-market springs to match your weight and riding ability for around $60-80. After a few years of gravity fighting with a general purpose set you will be amazed at what a difference the right springs can make in your ride. Want a quick check to see if you need them? Head down a slight grade at a moderate speed and hit the front brakes hard. Does the whole front end dive like a whale with Ahab on its tail? You need new springs!

If the front end gets no respect the rear suspension is the ugly stepchild of the bike. There is usually nothing to do except adjust the preload and most people get that wrong. When I was younger, and less wise, I assumed that cranking up the preload gave me better handling. All my buddies said so. Which only meant that all my buddies were ignorant and I was dumb for listening to them. Rule: Leave your preload as low as possible to prevent bottoming out. Do not confuse spring rate with dampening!

New shocks are the next best thing you can do to a bike with some miles on it. Factory shocks, just like factory fork springs, are set for the least common denominator. If you are the type who has never met a cheeseburger you didn't like you can crank up the preload to compensate but that will only hasten their demise in the end. If the back end has that oingo-boingo feeling the shocks have given their all and it's time for replacement.

Shocks are expensive. No doubt about it. Go to your dealer and ask about them and they will suddenly show you pictures of the new yacht they are thinking of buying. This is probably the main reason 30 year old bikes have 30 year old shocks. Starting thinking about specialty shocks like Works Performance or Ohlins and you will quickly get a nose bleed from the elevated heights you will be traveling in. Are they worth it? Lots of people think so and if you are a racer they are definitely worth it.

However, there is also Hagon shocks, made in England, that are 90% as good at less than half the price. In fact, they are better than most stock shocks and cheaper as well. What makes them even better is the US distributor, Dave Quinn. If you call you will probably speak to Dave himself. If you say that you need shocks for a 1989 Honda NX250 he will tell you "That's nice" and then ask you how much you weigh, how do you ride, and other factors that will determine what he sells you.

Dave makes up each order individually. Which shock body, combined with which spring rate, will match your specific needs. Got a mono-shock? He's got all the latest models. Want remote adjustments? He can put together any setup you want. For a vintage restoration he can match chrome springs and covers, or go all black for custom, or any combination. No extra charge.

I've used Dave and Hagon for several of my bikes and always been happy. Both with the performance of the shocks and the service from Dave. And he supports the biker community. Every summer the CT Brit Bike Assn. has a big show and swap meet where they raffle off a restored Triumph, BSA, or Norton. The club members do all the work and every year the bike has a brand new pair of Hagon shocks donated by Dave.

He also sells the fork springs so he can help you at both ends. Give him a call! You don't want to be hanging like that bag lady down the street do you? 203-393-2651
.

Spring Brake - Part 2

Yesterday I talked about my experiences with the NX250 brakes. Today I'll relate the rest of the tale of neglect.


Most people can relate to brake problems because they can appreciate the need to stop in normal riding. Add the occasional crisis and the rider will start thinking about stopping. Suspension, on the other hand, is a vague, theoretical concept that means little to the average rider. Even if they are aware they generally dismiss the bike's forks and shocks as an expensive part of the bike that rarely fails. Unfortunately, it also rarely works very well in stock form. Add miles and neglect and it goes from bad to worse.


While I had the NX's brake caliper off I decided to replace the fork seals. What I found was probably fork oil that might have been changed once since it was built in 1989. Twenty years of sludge were lurking in the bottom of the fork tubes. 

Fork tubes are a pretty sophisticated mechanisms that work to keep the tire in contact with the road. Bumps, pot holes, and irregularities are all dealt with in an attempt to balance control with comfort. A fork tube is composed of two linear bearings that allow the wheel to travel up and down. The internal passages and valves open and close to control the flow of fork oil which controls the dampening. This keeps the bike firmly in contact with the road and avoids the oingo-boingo bouncing you see in old Fords with bad shocks. When the oil gets old and filled with sludge the fork can't move the way it's supposed to and traction is lost. The NX was just such a case. Because it happens slowly over time it is hard to appreciate but it is a classic statement that a rider will make, "Boy, it really feels like a new bike!", when the fork oil is replaced. The NX took 420cc per side and used up a 1 liter bottle. Would you pay $15 for a new bike feel? Do it once a year and you'll never have to endure the old bike feel.


It's even easier to do than changing the brake fluid and can often be done at the same time. Most forks have a drain plug at the bottom of each fork leg. Simply unscrew the top fork cap to let air in and then remove the drain plug. Have the drain pan positioned so that it will catch a stream shooting out or you'll have a mess to clean up. When it's all drained out I usually shoot some contact cleaner down the tube to flush out the sludge. Then replace the drain plug and refill the tube with whatever the manufacturer recommends. If you think about it stop at your dealer and get new drain plug washers before you start. They are generally copper washers that cost about $1 apiece. 


Note: If you have newer cartridge style forks the good news is that they are much better a doing their job by design. The bad news is that they generally require the dealer and special tools to work on. Do it every third year and enjoy the ride.


Tomorrow I'll close this series with my views of the rear suspension.

Spring Brake - Part 1

Yesterday I talked about the importance of getting your bike ready for riding. More than just checking the oil level and tire pressure. I know some of you go all out and check the chain adjustment too but there is more to it than that if you want the bike to last and perform to new bike standards.

Yesterday I was working on an NX250 that I bought last fall as a simple, easy to ride bike that I could run errands on or loan to a friend who might be visiting. The NX series (125, 250, 650) were yet another Euro line that Honda brought to the US only to have them sell like day old fish cakes. Light, agile, electric start, stylish and fun they were dual sports that didn't fit into any cruiser/sport/power niche and people looked elsewhere for fun. Now they have a cult following that has kept prices high. The real icing on the cake is the 6-speed transmission. The 6^th gear is overdrive that allows the bike to cruise at freeway speeds all day long.

Back to my point, this bike had been taken for granted. Nothing terrible but everything needed attention because the normal once-a-year maintenance had never been done. The front brake was wooden, absolutely no feel. I ordered the master cylinder kit and caliper seals and got to work. Sure enough, the brake fluid was the consistency of molasses. And about the same color.

People, brake fluid (DOT 3 & 4) are hygroscopic. That means that they absorb moisture out of the air. Water and brake fluid don't mix and the water corrodes the insides of the brake parts. Another problem is that the water can boil if the brakes are applied for an extended period. The water vapor is very compressible, relative to brake fluid, and causes a big loss of brake power. Not good for a long downhill stretch.

I had to buff out the master cylinder and put the new kit in. When I put the air hose to the brake line a disgusting collection of grunge and sludge came out the other end. The caliper required honing to cleanup the bores and get the pistons to move freely. It's a wonder that there was any braking at all! New seals went in and I bled the brakes with new fluid. Now the brakes feel like new, plenty of power without being grabby.

All in all this cost me about $50 in parts + several hours of going to the dealer for parts and doing the work. And it all could have been avoided. Once a year, change the brake fluid and bleed your brakes! Take off the cover and pump new DOT 4 fluid through the system until it comes out as clear as it went in. 10 minutes and $5 for the fluid. That's all it takes to make your bike better and safer. Do it now!

PS: Take off the brake lever(s) and grease the pivots while you're at it. It's the little things that make a big difference.

Spring time is torque time.

So - the sun is out, the birds are singing, and the open road is calling. Maybe all of you in San Diego get to play all year but for the rest of us it's time to dig out the gear and hit the road.


Unfortunately that's just what I did a year and a half ago. I hadn't checked out a new (used) bike I had just bought and was rewarded with a collar bone broken in two places. Of course, the seller had assured me that everything was in perfect shape but had I checked it over thoroughly before riding I would have found that the swing arm and steering head bearings were loose. Combined with old, cold tires I was doing the horizontal slide on Rt 12. when I touched the front brake while leaned in a corner. A classic single bike accident.


However, since you didn't just buy a bike you don't have to do this right!? Wrong!!


You own a used bike. The fact that you are the one who used it makes it even more suspect. You would be the last one to notice the little things that have crept in over the miles. You adjusted to the wear and tear and learned to compensate. But, just like my bike, when things get a bit dicey all those little things can come together in a perfect storm to toss you on the ground. I was lucky, nobody else was on the road to run over me as I slid along. Things could have gone from bad to deadly had a semi been coming. Or some aged geezer with the reaction time of an arthritic sloth.


NOW IS THE TIME! Before it gets too nice to sit at home, take an hour and go over your bike from front to rear. How old are those tires? Tread depth is not a good judge of tire condition. DOT requires that the date of manufacture be encoded on each tire made since 2000. If it's older than that it's definitely time to replace! Tire Rack explains it all here. Can you make a dent in the tire with your thumbnail? If not get new tires because they are not gripping the road.


Get out a grease gun and lube all the joints on the bike. Then see if you have any play in the swing arm or steering head. What about the wheels? Are the wheel bearings loose? Even a little bit? They are not expensive, hospital bills are.

Finally, get out the torque wrench of your choice and torque every nut and bolt you can find. The best way is to take it out, clean it, apply blue Locktite, and re-torque. For steel bolts into aluminum parts I use anti-seize to prevent the dielectric corrosion that occurs between dissimilar metals.


Why use a torque wrench? Because most people over-tighten nuts and bolts. This can cause bearings to act improperly and other parts to distort and malfunction. Swing arms can't comply properly if they're too tight. Same with steering head bearings. Both can lead to deadly wobbles. Ever strip out a bolt because you thought it needed just a bit more? Or worse, stripped a bolt because the previous owner thought they were King Kong and ruined the threads?


Take the time to go over your bike now and enjoy the ride all summer. Your collar bone will thank you.

Resolution Kept

For the New Year I made a resolution to rationalize my motorcycle inventory. Decide what to ride, what to keep as a collection, and what to send down the road. You can read that post here.

So far, so good. The BMW /2 went last month and the CRF250X left this morning. The CB650 is running well and as soon as I get the title it's going on CraigsList. The brake master rebuild kit is here for the NX250 so it will be on CL next week too.

OMG! What am I going to do with all this room and spare time? Get to work on the LSR bike which has languished. And finish the mapping for b-cubed.

Most of all I'll just go riding and having fun again!
.

Computer crud (and how to make it better)

If you use an Apple or Linux computer you can check out now and come back tomorrow. If you have a PC I have two excellent tools for your computer that will make it "faster than a speeding bullet, stronger than a locomotive, and able to leap over tall buildings in a single bound."

CCleaner is a great tool for taking out the trash, getting rid of unwanted programs, cleaning up your registry, and removing programs that slow your computer at startup. The function I use most often is the the Recycle Bin cleanup. More than just emptying the trash it also cleans out the temp files, the browser caches, and the internet cookies. One shot, all done. It is all wrapped in a user friendly interface that doesn't take a geek to understand but puts all the options under your control. Once set up it can run as easily as the regular Empty function but does so much more.

Every computer comes with games, trial-ware, and other unwanted programs that the maker includes "to enhance your user experience". This usually means that they got a few bucks for including this crap at your expense. With google running in one window and CCleaner in another I was able to check on each program and eliminate a couple of gigabytes of programs I had installed and never used or that the manufacturer had installed. For instance I found that I had a program that controlled a dialup modem. First, I don't have a dialup modem and second, there isn't even a land line to the house any more! 350 megabytes of space reclaimed just for that one.

CCleaner also has a similar program for disabling programs that automatically start when you turn on the computer. Every program wants to think it is so important that it should take up memory so that you don't have to wait an extra 3 seconds when you really do want to use it. If you ever do. Again, Google in one window and CCleaner in another allows me to check what each one does and then decide to disable it or not. This is especially safe since you are not removing the program and can re-enable it if you guess wrong.

Finally, CCleaner has a registry repair function that checks for missing keys, broken links, and other crud that builds up over time. Since this is all kept in memory it is just wasted space and possibly info that can cause errrors. CCleaner first scans and presents a list of issues. Then, with your permission, it makes a backup and fixes the problems.

I've been using CCleaner for a few years, on a few differnent computers, without a single problem. It's good stuff and it's free! You can make a donation and I recommend that you do if you find it as useful as I do.

Once you get everything all cleaned up it's time to reorganize. Microsoft has a disk defrag utility that is worth every penny you paid for it. It's better than nothing but just. Smart Defrag is so much better in so many ways. It's another free program that does a deep defrag rather than a superficial one. It will do a disk optimization as well as the simple defrag. Caution: the deep optimization will take a long time! I usually start it before going to bed at night so that the computer is ready in the morning. Smart Defrag doesn't seem like much as there is only one thing it does. However, it does it really, really well.

Try out both of these programs, your computer will thank you. If you find them as useful as I do make a donation to the authors. They will thank you.

Another Freebie

I received a $10 Bike Bandit gift card in the mail and, since I don't use them, I've decided to pass it on. I have nothing against them, I just prefer Peninsula Honda / The Motor Cafe for my OEM parts if I'm not using my local dealer.

So leave a comment and I'll pick one at random. Good Luck and thanks for reading this blog.

American Racing

Peter sent this article on Maine ice racing from the New York Times:

The NYT article is here. The video is here.

It looks like a lot of fun if you bundle up well. The racing is good cheap fun in a land where employment is scarce and a job at Walmart is considered a very good thing.

It would be easy to dismiss them as a bunch of Red Necks until you dig a little deeper and see this as a bright spot in a hopeless world. The jobs are gone as tougher environmental laws restrict the logging that was the mainstay of the area. When I tried to set up a trail system for dual-sport bikes a few years ago I ran into a lot of opposition. I argued that tourists would bring cash to the area but was told that the greenie groups were in control of the state agency. Better to have land where nobody except elitist hikers can go than to have jobs so that local people don't lose their homes?

Definition of a Bad Day!

Too much advance on the spark? A little lean on the mixture? Compression too high?

All of the above?